Connecting Your RØDECaster Duo and Updating Firmware

After downloading RØDE Central, open the application, then connect your RØDECaster Duo using the supplied USB-C to USB-C cable (if your computer only has USB-A inputs, use a USB-C to USB-A cable like the RØDE SC18). Once connected, your RØDECaster Duo will appear as a device on the left. Click it to access the different configuration and setup options and device information, including available storage and current firmware version. If new firmware is available, you will be prompted to update.

Audio Setup

‘Audio Setup’ allows you assign channels to your faders using an easy drag-and-drop interface. The physical faders are represented by the four icons on the top left; the virtual faders are represented by the three icons on the top right. The sevene audio channels can be found below, with the two analog inputs on the top row and the Bluetooth, USB and SMART pads on the bottom row. Simply drag-and-drop the input sources to assign them to a fader. You can also change to channel colours, unassign inputs from a fader, stereo link channels, and clear all fader assignments from this page.

Device Configuration

‘Device Configuration’ allows you to adjust a number of important settings. These are categorised into three sections: ‘Outputs’, including changing your headphone type, monitor output and multitrack settings; ‘Display’, including changing brightness and metering settings; and ‘System’, including MIDI, language, date and time, and network settings.

Customize SMART Pads

RØDE Central allows you to load and export sounds directly from your computer, change playback modes, rename pads, and more. To find out more, refer to ‘Using the SMART Pads’ section of the user guide.

Transfer Recordings

To transfer recordings saved on an external microSD to your computer, click ‘Transfer Recordings’. You will then be prompted to place your RØDECaster Duo into ‘Transfer Mode’. Click ‘Continue’ to proceed.

Your recordings will be listed below from latest to earliest. You can change the order from the drop-down menu. Once a recording has been selected, you will be able to play back the audio. Click the arrow and marker buttons to skip through the audio file. There is a mini-nav bar above the main waveform. Use this to quickly navigate through longer recordings. You can also use the magnifying glass icons in the top right corner to zoom in and out of your recording.

To trim a recording, click and drag the start and end markers to the desired location (both the real-time and elapsed recording time can be found under the waveform).

In the bottom-right corner, you have the option to choose from a number of popular podcast distribution platforms, which will select the optimal export settings for that platform. You can also choose ‘Custom’ and select your own export settings, including format, sample rate, bit rate and loudness.

When you’re ready to export, click the ‘Export’ button, which will prompt you to select a save destination for your exported files. To export multiple files simultaneously, click the check box the each of the files you want to save, then click ‘Export’.

You can delete recordings by clicking the ‘Delete’ button (this will permanently delete the file from your SD card). To delete multiple recordings simultaneously, click the check box for the files you would like to remove, then click ‘Delete.