我们使用必要的cookie来使我们的网站正常运行。经您同意，我们还可能使用非必要的cookie来改善用户体验和分析网站流量。 点击“允许全部”，即表示您同意我们网站按照 Cookie政策.
您可以随时点击“偏好设置”来更改您的cookie设置。
偏好设置
允许我们使用所有 Cookie
NT1 5th Generation
Studio Condenser Microphone
第 5 代 NT1 是一款革命性的录音棚电容话筒，它将标志性的 NT1 的经典声音特征与尖端的下一代技术融合在一起。它具有 RØDE 开创性的（正在申请专利）双连接输出，提供 XLR 和 USB 连接，具有令人难以置信的多功能性。世界首创的 "不会削波失真"32 位浮点数字输出，先进的数字信号处理，等等，同时提供 NT1 因之闻名的同样的温暖、丝滑的特性，极低噪声和高声压级处理。第 5 代 NT1 是真正的录音棚主力，从语音和演讲，到吉他、钢琴、鼓和打击乐，都有出色的表现——是真正的终极录音棚话筒。
Key Features:
- 大振膜心形电容式话筒
- HF6 1 英寸金溅射电容音头
- 平滑的频率响应，高灵敏度和高声压级处理
- 超低本底噪音（4dBA）——世界上最安静的录音棚电容话筒
- 双连接输出，具有 XLR 和 USB 双连接性
- 世界首创的32-bit浮点数字输出
- 超高分辨率的模数转换，可高达到192kHz
- 用于高级 APHEX® 音频处理的板载数字信号处理
- 包装内含有录音棚级减震架和防喷罩，XLR和USB线材
- 话筒有黑色或银色两种颜色，具有坚固的铝合金机身和高强度表层处理
- 在澳大利亚悉尼的 RØDE 精密生产厂设计和制造。
主要特点
包装内容
资源
10 YEAR WARRANTY
DUAL CONNECT XLR & USB CONNECTIVITY
32-BIT FLOAT DIGITAL OUTPUT
1" GOLD SPUTTERED CAPSULE
原创经典录音棚话筒，重获新生
第 5 代 NT1 是标志性 NT1 的最新形态。NT1 于 1991 年首次推出，并风靡全球，以其温暖、经典的声音和难以置信的适应性而闻名。第 5 代 NT1 采用了备受喜爱和尊崇的 NT1 技术核心，并引入了最先进的功能，同时保留了传奇的音质，使它成为无数创作者的首选话筒。是传统与创新的完美结合。
颠覆性的连接性
第 5 代 NT1 采用 RØDE 开创性的、正在申请专利的双连接输出，既可以通过 XLR 连接到音频接口或混音器，也可以通过 USB 直接连接到计算机，实现录音棚级的即插即录。为任何录音场景提供了空前的灵活性。
走在前沿的经典声音
第 5 代 NT1 提供了与前代相同的温暖、丝滑的特性、极低的本底噪声和高声压级处理能力，并改进了电路，使自噪声更低——低到惊人的 4 dBA，使其成为世界上最安静的录音棚电容式话筒。当使用 XLR 输出时，它能提供您所熟悉和喜爱的 NT1 的丰富、经典的录音棚电容式声音。当使用数字输出时，您可以解锁一连串的尖端功能，以进一步增强您的音频，将专业录音棚级声音直接录入您的电脑。
未来数字工作室
第 5 代 NT1 的特点是在话筒中内置了一个专业级音频接口，经过完美优化，可以录制高保真音频；还提供了一系列高度创新的功能来增强声音，包括我们的超低噪声、高增益 Revolution Preamp™、高分辨率（192 KHz）模拟/数字转换和高级数字信号处理。它不仅仅是一个录音棚电容式话筒，而是一个一体化的数字录音解决方案。
“不会削波失真”的话筒
第 5 代 NT1 拥有世界首创的 32 Bit浮点数字输出——一种革命性的录音技术，使您可以录制从耳语到尖叫，从最柔和的吉他声到最响亮的鼓点等声音，而不必为增益的设置而困扰——只需在录制后调整您的音频，您表演的所有动态将被保留，完全不会有削波失真的风险。是颠覆性的创新。
无与伦比的适应性
凭借其平滑的频率响应、极低的本底噪声、超高动态范围、灵活的连接方式和强大的数字功能，第 5 代 NT1 提供了其他录音棚话筒所没有的多功能性。它可以在任何录音场景中都表现出色，从语音和演讲到吉他、鼓点到钢琴，从单独的卧室录音设置到专业录音棚，它能适应任何工作流程。
塑造您的声音
在第 5 代 NT1 强大的板载数字信号处理的驱动下，用先进的 APHEX® 音频处理技术精心打造您的声音。使用免费的 RØDE Connect 和 RØDE Central 配套应用程序，可轻松为您的音频添加压缩、高通滤波器、噪音门和传奇的 APHEX® Aural Exciter™ 和 Big Bottom™。使用直观的 VoxLab™ 编辑器，或者使用高级编辑器微调每个处理器，通过一个按钮就能录入完美的声音。
优质组件，经久耐用
第 5 代 NT1 采用优质组件，在澳大利亚悉尼的 RØDE 最先进的制造设施中按照最高标准制造。HF6 音头是按照亚微米级公差精密制造的，以确保在音色和频率响应方面的最大一致性， 并在内部安装了减震装置，以尽量减少外部振动带来的影响。机身由坚固的铝材加工而成，有黑色和银色两种颜色可供选择，其高强度表层处理非常耐刮擦，确保第 5 代 NT1 可以承受日复一日的严苛使用。
拥有开始录音所需的一切
第 5 代 NT1 的包装盒里提供了您开始录音所需的一切，包括 XLR 和 USB 线材，以及一个录音棚级的减震架和防喷罩，用于最大限度地减少录音中由爆破音、敲击声和碰撞声引起的不必要的杂音。
利用 RØDE 应用程序套件释放创意潜力
第 5 代 NT1 兼容一系列免费的 RØDE 应用程序，包括 RØDE Central 伴侣应用程序、RØDE Connect 播客应用程序和 UNIFY 流媒体应用程序，所有这些都允许您配置设置，使用高级数字信号处理，更新固件等。
RØDE Central | RØDE Connect | UNIFY |
|---|---|---|
 |  |  |
| RØDE Central 是一款易用的第 5 代 NT1 的配套应用程序，使您能够使用其先进的 APHEX® 处理和效果、输入增益控制和更新固件。在 RØDE Central 中配置您的话筒后，这些设置将持续存在，以便配合您的 DAW 或其他音频软件使用。 | RØDE Connect 是一款设计简洁、功能强大的软件解决方案，适合使用第 5 代 NT1 进行播客制作。除了可以使用话筒的先进 DSP 和更新固件外，该软件还可让您将最多四个 RØDE USB 话筒连接到一台计算机上，并具有用于混合和录制播客的直观界面。 | UNIFY 是一款终极虚拟混音软件，适合使用第 5 代 NT1 进行流媒体制作。将您的音源接入一个直观的混音器，通过专业处理找到您的完美声音，创建完全独立的混音，并将其全部录制为多声道音频，以便在后期制作中进行编辑，或者直接输出到直播录制软件（OBS）进行直播。 |
Download Now | Download Now | Download Now |
Custom ASIO Driver for Windows
To get the most out of your NT1 5th Generation when using it with a Windows computer, download its custom ASIO driver. This allows you to record in 32-bit float, control the input gain, change the buffer size, and record with up to eight individual NT1 5th Generation microphones via USB simultaneously.
第 5 代 NT1 用户指南
在这里找到您需要了解的有关第 5 代 NT1 演播室电容话筒的所有信息。这份全面的用户指南涵盖了您需要了解的有关用模拟和数字输出录音的一切内容，包括使用 32 位浮点输出、数字信号处理等。
规格
Acoustic & Electrical
Mechanical
Digital
Acoustic Principle
Pressure gradient
Active Electronics
JFET impedance converter with bipolar output buffer
Capsule
1.00"
Polar Pattern
Cardioid
Address Type
Side
Frequency Range
20Hz - 20kHz
Output Impedance
100Ω
Maximum SPL
142 dB SPL
Equivalent Noise (A-Weighted)
4dBA
Sensitivity
-32 dB re 1 Volt/Pascal (25
mV @ 94 dB SPL) +/- 2 dB
@ 1 kHz
Analogue Power Requirements
Via XLR: P48
Analogue Output Connection
3-pin XLR
下载
相关产品
常见问题
Q.
Does the NT1 5th Generation have a headphone output for zero-latency monitoring?
A.
The NT1 5th Generation doesn’t have an in-built headphone output for monitoring, but you can simply monitor with very low latency using either your computer’s in-built headphone output or an external audio interface.
Q.
How do I monitor my audio when using the NT1 5th Generation?
A.
You can monitor with low latency via your computer’s in-built headphone output or an external audio interface if you have one. Simply select the NT1 5th Generation as your input device and your desired output device in your DAW or audio software. To find out more about monitoring your audio, check out the user guide.
Q.
Does 32-bit float recording work when using the XLR output?
A.
The 32-bit float output is processed via the NT1 5th Generation’s in-built audio interface for the digital USB output only. The XLR output is a pure analog output, like a traditional studio condenser microphone so does not support 32-bit float recording. However, the incredibly low noise floor and dynamic range of the NT1 5th Generation is fully available on the XLR output and the NT1 5th Generation can be paired with any microphone preamp for capturing ultra-high-quality audio.
Q.
I am recording in 32-bit float, but I am still hearing clipping. What is going on?
A.
First of all, ensure that both the NT1 5th Generation and audio software you are using are set to 32-bit float mode (note: some DAWs do not support 32-bit float recording – check out the user guide [link] for step-by-step walkthroughs). Even in 32-bit float mode, you can still hear clipping while monitoring if the audio is too loud. Simply turn the mic input gain down and the clipping should disappear. Of course, in 32-bit float mode, you can still record this clipped audio and adjust after recording to remove the clipping.
If you are recording a very loud sound, it is possible you have exceeded the maximum SPL rating of the NT1 5th Generation. Like all microphones, the NT1 5th Generation has a maximum SPL (sound pressure level) which, when exceeded, can result in a small amount of distortion or clipping. The NT1 5th Gen has a max SPL of 142dB, which is very high and will only be exceeded by recording an extremely loud sound source or recording very close to the capsule.
Q.
Does this sound different to the previous NT1 and NT1-A?
A.
The NT1 5th Generation sounds practically identical to the fourth generation (all black) NT1 as it has the same HF6 capsule. The NT1-A features a different capsule and design to both of these microphones and has a slightly different sound signature.
Q.
Do the XLR and USB outputs sound the same?
A.
Yes. The USB and XLR outputs sound exactly the same. If you notice that the USB output sounds different to the XLR, you may have digital signal processing (DSP) activated. You can access the DSP settings via RØDE Central, RØDE Connect or UNIFY.
Q.
How do I control the gain on the NT1 5th Generation?
A.
There are a couple of ways to control the output gain of the NT1 5th Generation when recording using the USB output: via your computer’s sound settings; using the Audio MIDI Setup (on Mac) or custom ASIO driver (on Windows); or via RØDE Central, RØDE Connect or UNIFY. To find out more about setting your gain, check out the user guide.
Q.
How do I use the 32-bit float output?
A.
To use the NT1 5th Generation’s 32-bit float digital output, you need to connect to a computer via its USB output and ensure the bit-depth of the microphone and your DAW session is set to 32-bit. To find out more about using the 32-bit float output, check out the user guide.
Q.
Is the self-noise the same on both the XLR and USB output?
A.
Yes. Both the XLR and USB output have a very low self-noise rating of just 4dbA. The NT1 5th Generation’s digital USB output features our ultra-low-noise Revolution Preamp technology, which does not increase the self-noise of the microphone.
Q.
Can I use the XLR and the USB connection at the same time?
A.
No, it is not possible to use both XLR and USB simultaneously.
Q.
Can I use any ASIO driver on my PC in order to use the 32-bit float output?
A.
No. To use the NT1 5th Generation’s 32-bit float output with a Windows PC, you need to use its custom ASIO driver, which you can download here.
Q.
What are the USB power requirements?
A.
The NT1 5th Generation requires at least 5V of power via USB to operate. Most standard USB ports and hubs can provide this. If you are using a laptop on battery power, and your mic is not working, check that the USB settings are not defaulting to ‘power save’ mode, which can restrict the power available over USB, causing the mic to not work properly.
Q.
Can we use one or more NT1 5th Generations with RØDE Connect? If so, will this record in 32-bit?
A.
Yes, you can connect up to four NT1 5th Generation microphones to RØDE Connect. Currently RØDE Connect does not support 32-bit float recording.
Q.
Is the NT1 5th Generation compatible with RØDE Central?
A.
Yes. You can use RØDE Central to control the input gain and processing on the NT1 5th Generation when connected via USB.
Q.
Can you record directly into a smartphone or tablet with the NT1 5th Generation?
A.
The NT1 5th Generation does not fully support connection to a smartphone or tablet as your device may not supply enough power for the microphone to operate.
Q.
Can I use 32-bit float recording with Adobe Audition?
A.
32-bit float recording is supported on Adobe Audition on Mac, but it is not supported on Windows. To see a list of DAWs that support 32-bit float on Mac and Windows, click here.
Q.
What type of USB connection does the NT1 5th Generation have?
A.
The NT1 5th Generation features a Hi-speed USB 2.0 connection, with a USB-C connector.