Microphones / Studio Condenser / NT3

NT3

3/4-inch Cardoid Condenser Microphone

제품 구입

The NT3 is a versatile end-address 3/4-inch condenser microphone that provides incredible detail on almost any sound source you can imagine, from drums to guitar amps to vocals. Intended for studio, stage and location work, the NT3 is ideal for use on a stand or boompole, or as a handheld mic. It features a rugged all-metal body and durable mesh head to ensure it is well protected in the studio or in the field, and can be powered either by P48 phantom power or a 9V battery for added flexibility.

Key Features:

  • Versatile 3/4-inch cardioid condenser microphone
  • Full frequency response
  • Internal capsule shock mounting
  • Powered either by P48 phantom power or a 9V battery for added flexibility
  • 10-year warranty
주요 기능
박스 안에 뭐가 들어 있나요
자료
10 YEAR WARRANTY

10 YEAR WARRANTY

DUAL POWER (9 VOLT)

DUAL POWER (9 VOLT)

3/4" TRUE CONDENSER CAPSULE

3/4" TRUE CONDENSER CAPSULE

사양

Acoustic & Electrical

Mechanical

Acoustic Principle
Pressure gradient
Active Electronics
JFET impedance converter with bipolar output buffer
Capsule
0.75"
Capsule
Cardioid
Address Type
End
Frequency Range
20Hz - 20kHz
Output Impedance
200Ω
Output Impedance
140dB SPL
Maximum Output Level
9.5mV (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity
-39.0dB re 1 Volt/Pascal (12.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-Weighted)
16dBA
Power Requirements
9v battery, P12, P24 or P48
Output Connection
XLR

다운로드

Quickstart Guide
Download

자주 묻는 질문

Q.
How can I connect my mono microphone XLR output to a stereo TRS socket?
A.

To connect the XLR microphone output to a TRS stereo input (3.5mm socket), you will need an XLR to stereo TRS cable. This will allow you to receive the audio signal on both input channels.

Please note: Should the microphone require phantom power to operate, this will not be available from a TRS socket.

A.

We recommend an Alkaline or Lithium battery for the best possible battery life. All RØDE specifcations have been carried out using this type of battery. If you use a slightly lower power battery, the mic will work but may not meet our published specifcation.