Microphones / 枪式麦克风 / NTG2

NTG2

双电源枪式麦克风

立即购买

NTG2 是一款轻型枪式电容麦克风，专为电影、视频、电视和广播领域的专业应用而设计。它具有全频响应、低噪音和音频透明度等特性，因此成为包括电影制作、画外音和流媒体在内的一系列应用的理想选择。这款产品可以使用 P48 幻象电源或可拆卸式 AA 电池供电，从而可在录音室或野外的使用环境下实现最大的灵活性。它还配有可切换的高通滤波器，增加了灵活性。

主要特点：

  • 高品质双电源枪式麦克风
  • 使用 P48 幻象电源或 AA 电池供电
  • 低噪音和全频响应
  • 高度定向
  • 高通滤波器 (80Hz)
  • 重量轻、易于使用
    • 主要特点
    包装内容
    资源
    HIGHLY DIRECTIONAL

    HIGHLY DIRECTIONAL

    DUAL POWER

    DUAL POWER

    10 YEAR WARRANTY

    10 YEAR WARRANTY

    IT RECYCLING COMPLIANCE

    IT RECYCLING COMPLIANCE

    规格

    Acoustic & Electrical

    Mechanical

    Acoustic Principle
    Line Gradient
    Active Electronics
    JFET impedance convertor with balanced transformer output
    Capsule
    0.50"
    Polar Pattern
    Supercardioid
    Address Type
    End
    Frequency Range
    20Hz - 20kHz
    Output Impedance
    250Ω
    Maximum SPL
    131dB SPL
    Maximum Output Level
    6.9mV (@ 1kHz, 1% THD into 1KΩ load)
    Sensitivity
    -36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
    Equivalent Noise Level (A-Weighted)
    18dBA
    Power Requirements
    AA Battery and P48
    Output Connection
    XLR

    下载

    Datasheet
    Download
    Product Manual
    Download
    EC - Declaration of Conformity
    Download

    常见问题

    Q.
    How can I connect my mono microphone XLR output to a stereo TRS socket?
    A.

    To connect the XLR microphone output to a TRS stereo input (3.5mm socket), you will need an XLR to stereo TRS cable. This will allow you to receive the audio signal on both input channels.

    Please note: Should the microphone require phantom power to operate, this will not be available from a TRS socket.

    A.

    There can be power issues when trying to run the NTG-2 from 1.2V batteries, this usually sounds like popping in the audio signal. Our specifications state that the NTG-2 requires 1.5V batteries to correctly power the microphone.